KOH／SBA-15负载型固体碱催化剂的合成、表征及催化性能

采用后合成法制备出固体碱催化剂KOH／SBA-15,利用X射线衍射法（XRD）、N2吸附-脱附（BET）、透射电镜（TEM）、化学吸附剂表面碱性测定（COz—TPD）等对其进行表征。考察了其在大豆油酯交换反应制备生物柴油中的催化性能。结果表明,在相同反应条件下,与CaO／SBA-15和MgO／SBA-15相比,KOH／SBA-15在催化活性和孔扩散上都具有较大的优越性,催化制备生物柴油产率最高（83．56％）。     

Immunomodulatory Activity of Recombinant Ricin Toxin Binding Subunit B (RTB)

Ricin toxin binding subunit B (RTB) is one of the subunits of the ricin protein. RTB has been used as adjuvant, but little is known about its mechanism. In this study, we found that RTB increased not only nitric oxide (NO) release, but also tumor necrosis factor (TNF)-α and interleukin (IL)-6 production in mouse macrophage cell line RAW264.7 cells. They subsequently exhibited enhanced ConA-induced T-cell and LPS-induced B-cell proliferative responses. We also examined the cytokines that were produced from splenocytes following in vitro RTB administration. Increased levels of IL-2, interferon (IFN)-γ and TNF-α were observed, while IL-4 and IL-5 were unaffected. These results demonstrate that recombinant RTB can act on the immune system and activate T-cells by introducing a Th1 immune response. Th1 cells might be the primary cellular target affected by RTB. Our results suggest that the recombinant RTB can promote the activation of macrophages and has a beneficial effect on immunomodulatory activity.     

Isolation,Expression, and Characterization of a Hydroperoxide Lyase Gene from Cucumber

A full-length cDNA coding for hydroperoxide lyase (CsHPL) was isolated from cucumber fruits of No. 26 (Southern China type) and No.14-1 (Northern China type), which differed significantly in fruit flavor. The deduced amino acid sequences of CsHPL from both lines show the same and significant similarity to known plant HPLs and contain typical conserved domains of HPLs. The recombinant CsHPL was confirmed to have 9/13-HPL enzymatic activity. Gene expression levels of CsHPL were measured in different organs, especially in fruits of different development stages of both lines. The HPL activities of fruit were identified basing on the catalytic action of crude enzyme extracts incubating with 13-HPOD (13-hydroperoxy-(9Z,12E)-octadecadienoic acid) and 13-HPOD + 9-HPOD (9-hydroperoxy-(10E,12Z)-octadecadienoic acid), and volatile reaction products were analyzed by GC-MS (gas chromatography-mass spectrometry). CsHPL gene expression in No. 26 fruit occurred earlier than that of total HPL enzyme activity and 13-HPL enzyme activity, and that in No. 14-1 fruit was consistent with total HPL enzyme activity and 9-HPL enzyme activity. 13-HPL enzyme activities decreased significantly and the 9-HPL enzyme activities increased significantly with fruit ripening in both lines, which accounted for the higher content of C6 aldehydes at 0–6 day post-anthesis (dpa) and higher content of C9 aldehydes at 9–12 dpa.     

基于OpenGL的海面场景模拟

研究海面场景的三维模拟技术。针对军事试验中对海面场景的需要,从分析海浪的物理模型出发,分析和研究基于海浪谱的海面建模方法,选取Pierson-Moskowitz海浪谱,利用具有平台独立性的OpenGL图形库对海面场景进行模拟,快速实时有效地的模拟了,不同风速下的海面场景。     

数字地面多媒体广播外辐射源雷达目标探测实验研究

数字地面多媒体广播(DTMB)是我国具有自主知识产权的数字地面电视广播标准,该文介绍了利用武汉大学研制的多通道外辐射源雷达实验平台开展DTMB外辐射源雷达研究的情况。论述了该体制雷达的工作原理、关键技术、探测设备和外场实验,给出了目标探测初步实验结果,从实验上证实了利用DTMB信号实现目标探测的技术可行性。     

Optical and photoelectrochemical properties of a TiO2 thin film doped with a ruthenium–tungsten bimetallic complex

Optical and photoelectrochemical (PEC) properties of a TiO₂ thin film electrode doped with a new variation of ruthenium–(4,4′dimethyl-2,2′-bipyridine)–isothiocyanato–tungsten[bis-(phenyl-1,2-ethilenodithiolenic)] bimetallic complex (BM) were investigated. Physical adsorption process was used to immobilise the BM on the TiO₂ thin film. Crystalline structure and surface morphology of the thin films were examined using scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy-dispersive X-ray (EDX) techniques. N3 commercial dye was also used as a dopant to the TiO₂ films for comparison. Light absorption spectra and bandgap energy of the thin films were determined using UV–vis spectroscopy. Light absorption of the TiO₂ thin film doped with BM was better than the TiO₂ doped with the N3 commercial dye. Band edges of the TiO₂ thin film and the BM were determined via cyclic voltammetry (CV) measurements. Top-edge of the BM valence band (VB) was more positive than the bottom edge of the conduction band (CB) of the TiO₂ film (vs. NHE). PEC analysis indicated that photocurrent of TiO₂ doped with the BM electrode was higher than TiO₂ doped with the N3 in the beginning of illumination process, but the performance was defeated after a while. Based on the optical properties and the PEC analyses, BM has potential to be used as dye sensitisers for a PEC cell.     

Ultraviolet light aging properties of PVC/CaCO3 composites

The ultraviolet radiation aging behaviors of PVC/CaCO₃ and PVC/CaCO₃/macromolecular modifier composites were studied through whiteness measurement, Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, scanning electron microscopy, and mechanical properties test. It was found that nano‐CaCO₃ particles used as ultraviolet light screening agents could significantly enhance the antiaging properties of PVC materials. Due to the macromolecular modifier coated on nano‐CaCO₃ particles, the compatibility of nano‐CaCO₃ and PVC matrix was improved, resulting in uniform dispersion of nano‐CaCO₃ in PVC matrix. Therefore, the PVC/CaCO₃/MP composite exhibited better antiaging properties than PVC/CaCO₃ composite. After 12 h of ultraviolet irradiation, the tensile strength retention, elongation at break retention, and impact strength retention of PVC/CaCO₃/MP composite were 79.5%, 74.5%, and 75.3%, which were much higher than that of neat PVC and PVC/CaCO₃ composite. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of amphiphilic heteroarm star‐shaped polymer via free radical polymerization using polyfunctional chain transfer agent and its self‐assembly behavior

Amphiphilic heteroarm star‐shaped polymers have important theoretical and practical significance. In this work, amphiphilic heteroarm star‐shaped polymer was synthesized by the use of polyfunctional chain transfer agent via sequential free radical polymerization in two steps. First, conventional free radical polymerization of methyl methacrylate (MMA) initiated by 2,2′‐azobis (isobutyronitrile) (AIBN) was carried out in the presence of polyfunctional chain transfer agent, pentaerythritol‐tertrakis (3‐mercaptopropinate) (PETMP). At appropriate monomer conversion, about two‐arm s‐PMMA having two residual thiol groups at the chain center was obtained. Second, the s‐PMMA obtained above was used as macro‐chain‐transfer agent for free radical polymerization of acrylic acid (AA). The heteroarm star‐shaped polymer with the hydrophobic PMMA segment and the hydrophilic PAA segment was obtained. The successful synthesis of heteroarm star‐shaped polymers, (PMMA)₂(AA)₂, was confirmed by ¹H‐NMR and its self‐assembly behavior in different solvents. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

New heat-resistant polytriazole adhesives: investigation of adhesion of polytriazole resins to metals

Crosslinkable polytriazole resins (CPTs) were synthesized by 1,3-dipolar cycloaddition reaction between azide and alkyne monomers. Adhesion properties of CPTs and an epoxy resin to different metal substrates (copper, iron and aluminium) were evaluated in terms of the tensile lap shear strength. CPTs to aluminium and iron substrates have higher adhesion strength than those to copper substrates. The effect of temperature and humidity on adhesion strength has been investigated. The resin CPT-3 has the best heat resistance among CPTs, whose retentions of adhesion strength are approximate 80% at 150?°C and 70% at 180?°C to all the substrates. CPTs have high adhesion properties at high temperature and humidity as compared with an epoxy resin.     

Influence of Process Variables on the Reactivity of Low Formaldehyde Emission Urea-Formaldehyde Resin

One of the important characteristics of the thermosetting resins such as urea-formaldehyde resin is the cure property. This is an invaluable characteristic for determining the processing capabilities of the resin. Differential scanning calorimetry (DSC) measurements are ideally suited to achieve this end. This paper presents the results of the effect of process variables on the enthalpy of cure of a low formaldehyde emission UF resin prepared by a four-stage process as described in the text. Response surface methodology (RSM) was used to design and the analyze the experiments. Urea (U) was added to the reaction mixture according to a pre-determined program of varying the number of additions and the duration between the additions during the second stage of the process. A mathematical relationship between the process variables and enthalpy of cure was established. The urea-formaldehyde (UF) resin was prepared under optimum conditions. Experiments were performed with the resin so prepared to determine the energy of activation of the curing reaction catalyzed by ammonium chloride.